Ave Technologies Rotary TriBlock Rinser - Filler Capper with Krones Rotary Labeler - Line 2
Item: 349800

This lot is being sold "as is, where is". We recommend that you contact a sales representative to set up your own inspection. This item is located in .

Price: $700,000.00

Ave Technologies Rotary TriBlock Rinser - Filler Capper with Krones Rotary Labeler - Line 2

TriBock Rinser - Filler, Capper
• Manufactured by Ave Technologies SRL
• Model: 60/80/12
• Year of manufacture: 2001
• 60 head rotary rinser, 80 head rotary filler and 12 head Zalkin capper
• Currently running 1.75 liter round glass bottles and 1.75 liter round PET bottles
• Currently running at approx. 280 - 300 bottles per minute
• Product being run is liquor / spirits
• The rinse cycle is using spirits in order to maintain the product 'proof'
• Rinser has a separate pump system with filter to recirculate product back to the rinser
• Filler has 80 heads
• Uses a vacum style filling system and vacuum pump that creates a depression inside the container.
• Filling is carried out after the depression phase.
• Once the pre-set level is achieved, the product in excess is returned to a recovery tank where it can be sent on to the process system if required.
• The filling tank is completely manufactured in AISI316, as well as all the parts in contact with the product.
• Has 20mm fill valves installed
• Capper was manufactured by Zalkin and was replaced in 2009
• Running both plastic screw caps and ROPP crimp caps - sleeves
• Capper model: T12/576
• Serial #: 94818
• Job #: FZ-1378
• Job #: 2009015
• Direction of feed: Left to right
• Maximum output: 24,900 bottles per hour (415 per minute)
• Centrifugal style cap sorter
• Pitch circle diameter: 576 - pitch 150,72
Cap elevator is not included
• Allen Bradley SLC 5/05 PLC controlled with a PanelView plus 1000 operator interface

• Manufactured by Krones
• Model: Multimatic - Autocol
• Serial #: 747-501
• Year of manufacture: 2001
• Unit has six APS-3 label heads that were installed in 2006
• 46 bottle plates
• Container side notch (bottle spot) - bottle plate orientation for front and back of round bottles on infeed
• Is currently installed and still running
• Product run: 1.75 liter bottles of liquor - spirits
• Speeds were approx. 180 bpm with PET and 200 bpm with glass
• Allen Bradley PLC controlled with a PanelView 1000 operator interface
• Unit is running with three label heads with a redundant head for each label
• Includes five sets of change parts (plastics)
• Cam driven bottle plates
• Vision system and laser coder are not avail. and will be kept by the seller.

Download PDF1 - More Equipment Detail
Download PDF2 - More Equipment Detail

Manufacturer: Ave Technologies SRL

Year: 2001

Model: 60/80/12

Capacity Speed: 280 BPM

Product Sizing: 1.75 liter glass and plastic bottles

Products Run: Liquor / spirits

Spare/Change Parts: YES

Estimated Shipping Weight: 0 LBS

Length: 0 IN

Width: 0 IN

Height: 0 IN

Voltage: 480 VOLTS

Frequency: 60 HERTZ

Phase: 3

Type of Cap: SCREW

Filling Method: OTHER

Recommended Packaging Form: CUSTOM

Ave Technologies Rotary TriBlock Rinser - Filler Capper with Krones Rotary Labeler - Line 2

Contact information:
John Moore
Tel: + 44 (0) 777 151 5834
Email: jmoore@indassol.com
Return to the main sale page
View Photographs

Sale held in conjunction with: